within the 48 Contiguous United States
Reverse Osmosis filtration cleans water by taking out the totally dissolved solids (TDS) which contaminate the water. Although city water treatment removes the dirt and debris and adds chlorine to prevent the spread of diseases, it does not remove the dissolved solids from the water. And with the increasing pollution of our surface and ground water with contaminants such as lead, mercury, and chromium-6, as well as the naturally occurring harmful contaminants such as arsenic, fluorides, and sulfides found in some areas of the country, it is more important than ever to have a way to remove these contaminants at the point of use.
Reverse Osmosis membranes used in water filtration systems can on average, remove 95% of dissolved contaminants from water. (See table at right.) Only 1% of the city water entering the home is used for drinking and cooking – about 2-3 gallons per day – where the average home uses 300 gallons per day or more. So it makes sense to clean just the water needed for drinking and cooking at home. City water is available at the home from already-installed water mains and has the required pressure of 60 to 75 psi to make the reverse osmosis system work.
Osmosis is a naturally occurring process in human and animal membranes. Salts in the body fluids build up osmotic pressure, forcing water molecules through the living membranes in our bodies. In under-sink reverse osmosis systems, pressure from the city water overcomes the “salt” pressure of the dissolved materials and forces the water molecules through a synthetic thin film membrane, leaving the dissolved salts behind. The city water enters the membrane filter element, and two streams leave; the clean water and the water containing the dissolved solid residue, called brine, which is discarded to the drain. On the comparative chart below, reverse osmosis removes the smallest of materials, from 1-micron down to 1- Angstrom. For materials larger than 1-micron, particle filters are used ahead of the RO membrane to prevent plugging of the tiny membrane pores.
Factory Tests at 65psi and 77F. Actual rates may vary.